4 Repeat Step 3 until all new servers have been added.Note A newly discovered server recognizes all the GuardianOS-powered SnapServers on its subnet. Save time by adding only one new server from a newsubnet; Adaptec Storage Manager will automatically discover the rest.5 Click OK.The new servers and any other GuardianOS-powered Snap Servers discoveredon the same subnets are added to Adaptec Storage Manager.Removing Offline Servers from Adaptec Storage ManagerTo make monitoring easier, you can remove all offline GuardianOS-powered SnapServers from Adaptec Storage Manager.Note You can’t specify which individual servers to remove from Adaptec StorageManager; all offline GuardianOS-powered Snap Servers are removed.To remove offline servers:1 In the Enterprise View, right-click Network Attached Storage, then click Removeoffline network attached storage.2 Click OK to confirm.All offline GuardianOS-powered Snap Servers are removed from AdaptecStorage Manager.Disabling Remote Discovery of GuardianOS-Powered Snap ServersYou can choose to remove from Adaptec Storage Manager all GuardianOS-powered Snap Servers that are on remote subnets by disabling remote discovery.You might want to do this if there are too many servers in the view to monitoreasily, or if you want to monitor only the servers on the local subnet.To disable remote discovery:1 In the Enterprise View, right-click Network Attached Storage, then click Addremote network attached storage.The Remote Servers window opens.
