Step 7: Registering Your iSCSI Storage ApplianceIf you didn’t register your iSCSI Storage Appliance at the end of “Step 2:Configuring the iSCSI Storage Appliance” on page 36, you will be prompted toregister again when:• You next log in to the Management Service. Adaptec Storage Manager finds anyunregistered iSCSI Storage Appliances associated with that Management Serviceand prompts you to register each one individually.• You next view or change the configuration settings on that iSCSI StorageAppliance in the wizard.You must register your iSCSI Storage Appliance to receive notification of newsoftware releases and updates, and to receive technical support.Beginning to Use Your IP SANOnce setup is complete, use Adaptec Storage Manager to manage and monitor yourIP SAN.Logging In To Adaptec Storage Manager Next TimeOnce your IP SAN is set up, each time you start Adaptec Storage Manager, anyManagement Services on the iSCSI Storage branch will be grayed out.To begin a new session on Adaptec Storage Manager, click on the grayed outManagement Service.Unless you enable the ‘Save User’ feature when you log in to the ManagementService (see page 35), you will be prompted to enter a user name and password.Once you have logged in and the connection to the Management Service is re-established, all iSCSI Storage Appliances and iSCSI Storage Hosts associated withthat Management Service appear in the Enterprise View and you can begin tomonitor and manage your IP SAN.
