Snap Server and Expansion Array HardwareSpecificationsThis section provides hardware specifications for the Snap Server 700iSeries and SANbloc S50 expansion arrays. Specifications are subject tochange without notice; for updates to and further information on thespecifications, see http://www.snapserver.com.Caution Use only qualified components purchased from an authorized Adaptecreseller to service Snap Server storage products. Qualified means that Adaptectechnicians have tested and verified that the component operates properly with theSnap Server and other network components. Failure to use qualified componentsmay seriously impact data availability, potentially lead to data loss and corruption,and will void your warranty.Snap Server 700i Series SpecificationsFeature SpecificationNetwork Connection Autosensing 10/100/1000Base-T, dual RJ-45 networkconnectors, with support for load-balancing and failover.Dimensions Width .....................17.5 in (444.5 mm)Depth .....................28.07 in (713 mm)Height ....................1.75 in (44.45 mm), 1UWeight ...................40 lbs (18.5 kg)Power Power Rating: 400W, 100-240 VAC, 50-60Hz,Input Current: 3.4A (RMS) for 115VAC, 2.3A (RMS) for 230VACPower Consumption: 290W (steady state), 360W (maximum)Heat Dissipation: 990 BTUs/hrOperatingEnvironment50° F to 95° F (10° C to 35° C)20% to 80% humidity (noncondensing)Vibration: .10G at 10-300Hz Random for 120 min. max durationShock: 6 pulses of 33G for up to 2msAltitude: 0 ft. to 10,000 ft. (0m to 3,048m)NonoperatingEnvironment14° F to 149° F (-10° C to 65° C)5% to 95% humidity (noncondensing)Vibration: 2G at 5-500Hz for 90 min. max durationAltitude: 0 ft. to 35,000 ft. (0m to 10,668m)RegulatoryCertificationsUL, cUL, CE, FCC Class A, TuV, NEMKO, CTick
