11 Create a discovery Control List. (A discovery control list allows one or morespecified iSCSI initiators to discover an iSCSI target while preventing other iSCSIinitiators from discovering it. See page 83 for more information.)a Click Add Initiator.The Add iSCSI Initiator window opens.b Enter the IQN (iSCSI Qualified Name) assigned to the iSCSI initiator.c Enter a name (or alias) for the initiator. The name must begin with a alphabeticcharacter, and can contain only letters and numbers.d (Optional—VMware ESX users only) Click Advanced options, then enable Usespermanent discovery session.e (Optional—Advanced users only) Click Advanced settings to enable or disableProtocol Data Unit, iSCSI ping, and discovery settings.Note Refer to your iSCSI initiator’s documentation for more information aboutthe advanced settings.f Click OK.Note The iSCSI initiator appears in the Initiators drop-down menu.g Repeat Steps a to f to add more initiators, if required.h From the Initiators drop-down menu, select the initiator you want.i From the list of logical devices, select the logical device(s) that you want theselected initiator to discover, then click the right arrow (>).j Repeat Steps h and i for each iSCSI initiator.Note Each logical device can support up to 32 iSCSI initiators. For moreinformation about auto-discovery control lists, see page 83.k Click Next, review the configuration summary, click Apply, then click Yes.
