5-5disk Commandsdisk listTo display a list of the disks available on the currently openedcontroller, use the disk list command.Syntaxdisk list [/all{=boolean}] [/full{=boolean)][{scsi_device}]Parameters{scsi_device}Specifies the ID for a specific SCSI device for which you wantto display information. A SCSI device consists of a SCSIchannel number (for example, 0, 1, 2, 3, etc.), SCSI device ID(0 through 15 inclusive), and SCSI device logical unit number(0 through 7 inclusive).For further details, see scsi_device on page 1-10.Switches/all{=boolean}Specifies whether to display a list of all SCSI devices. If youset this switch to TRUE, the command displays a list of allSCSI devices on the controller.This switch defaults to FALSE if you specify scsi_device.Otherwise, the switch defaults to TRUE./full{=boolean}Specifies whether to display detailed information. If youspecify TRUE, the command displays detailed information. Ifyou specify FALSE, the command does not display detailedinformation.This switch defaults to FALSE.
