5-19disk Commandsdisk show partitionTo display a list of partitions on the disks attached to the currentlyopened controller, use the disk show partition command.Syntaxdisk show partitionExamplesThe following example shows a sample output from the diskshow partition command:AAC0>disk show partitionExecuting: disk show partitionScsi Partition Array MultiLevelC:ID:L Offset:Size Num Type Num Type R/W------ ------------- --- ------ --- ------ ---0:02:0 64.0KB:20.0MB 0 Volume 0 None RWThe following sections provide more information on the columnsthat the disk show partition details command displays.The SCSI C:ID:L ColumnsThe C:ID:L column displays the SCSI channel number, the SCSIdevice ID, and the SCSI device logical unit number for each disk onthe currently opened controller.In the example, the command displays the SCSI channel number,the SCSI device ID, and the SCSI device logical unit number for onedisk (0:02:0) on the currently opened controller.The Partition Offset:Size ColumnThe Partition Offset:Size column displays the offset (in bytes) intothe SCSI device and the size of the partition (in bytes). In theexample, the offset is 64.0 KB and the size is 20.0 MB.If a partition is dead, the “:” (colon) in the Partition Offset:Sizecolumn changes to a “!” (exclamation point). See the diskremove dead_partitions (page 5-10) command for moreinformation on dead partitions.
