6-4diagnostic Commandsdiagnostic dump textTo display diagnostic information on the console display for use bytechnical support during bug reporting, use the diagnosticdump text command.Caution: Use this command only under the direction oftechnical support.NotesBefore using this command in DOS, verify that the window is set toscroll data. For details, refer to your DOS documentation.Before using this command on other operating systems, you mightwant to make sure your windowing system is set up to scroll data.See your operating system documentation.You might also want to use the logfile start command to makesure the diagnostic-related information gets sent to the logfile.Syntaxdiagnostic dump textExamplesThe following example displays diagnostic information on theconsole display:AAC0>diagnostic dump textExecuting: diagnostic dump textPartitions:6The command displays a variety of information in table format. Italso displays:*** HISTORY BUFFER FROM LAST RUN ***[00]:*** HISTORY BUFFER FROM CURRENT CONTROLLER RUN ***[00]:==============Dump Complete.!
