5-26disk Commandsdisk show spaceTo display space usage information on a SCSI disk, use the diskshow space command.Syntaxdisk show space [/all{=boolean}] [{scsi_device}]Parameters{scsi_device}Specifies the ID for the SCSI device for which you want todisplay space usage information. A SCSI ID consists of a SCSIchannel number (for example, 0, 1, 2, 3, etc.), a SCSI device ID(0 through 15 inclusive), and a SCSI device logical unitnumber (0 through 7 inclusive).For further details, see scsi_device on page 1-10.Switches/all{=boolean}Specifies whether to show space usage information for allSCSI disks on the currently opened controller. If you set thisswitch to TRUE, the command shows space usage informationfor all SCSI disks on the currently opened controller.This switch defaults to FALSE if you specify thescsi_device parameter; otherwise, the switch defaults toTRUE.ExamplesThe following example shows space usage information for all ofthe SCSI disks on the currently opened controller:AAC0>disk show spaceExecuting: disk show spaceScsi C:ID:L Usage Size----------- --------- -------------0:02:0 Array 64.0KB: 20.0MB0:02:0 Free 20.0MB: 29.0MB0:03:0 Free 64.0KB: 49.0MB0:04:0 Free 64.0KB: 49.0MB0:05:0 Free 64.0KB: 49.0MB
