9-13enclosure Commandsenclosure set alarmTo turn the audible alarm on a specific SAF-TE enclosuremanagement device on or off, use the enclosure set alarmcommand.Syntaxenclosure set alarm [/on{=boolean}] {enclosure}Parameters{enclosure}Specifies the ID associated with the enclosure managementdevice whose audible alarm you want to set. For this version,the controller supports a maximum of eight enclosuremanagement devices on each bus.Switches/on{=boolean}Specifies whether to turn the enclosure management device’saudible alarm on or off. If you set this switch to TRUE, thecommand turns on the audible alarm. If you set this switch toFALSE, the command turns off the audible alarm.The default is FALSE.ExamplesThe following example turns on the audible alarm on enclosuremanagement device 0:AAC0>enclosure set alarm /on=TRUE 0Executing: enclosure set alarm /on=TRUE 0Related Commandsenclosure commands: enclosure list (page 9-6)
