Turning the Machine On/OffB-8Turning the Machine On/OffWARNING• Use only regular household electricity for the power source. Using other power sources may result in fire,electric shock, or damage to the machine.• Make sure that the plugs on the power cord are firmly inserted into the electrical outlet and the powercord receptacle on the machine. Otherwise, a fire or electric shock may result.• Do not insert the plug on the power cord into an electrical outlet that is in poor condition.• Turn the main power to OFF and remove the plug in the following circumstances:When you are away from the machineAfter using the machineWhen the power fails during useWhen the machine does not operate correctly due to a bad connection or a disconnectionDuring electrical stormsCAUTION• Use only the power cord included with this machine.• Do not use extension cords or multi-plug adapters with any other appliances plugged into them. Fire orelectric shock may result.• Do not touch the plug with wet hands. Electric shock may result.• When unplugging the machine, always turn the main power to OFF first. Always grasp the plug to removeit from the electrical outlet. Pulling on the cord may damage the cord, or lead to fire or electric shock.• Do not allow the power cord to be cut, damaged, modified, forcefully bent, pulled, twisted, or bundled.Do not place heavy objects on the cord. Do not subject the cord to heat. These things may damage thecord, or cause fire or electric shock. If the cord or plug is damaged, take the machine to your authorizedBaby Lock retailer for repairs before continuing use.• Unplug the power cord if the machine is not to be used for a long period of time. Otherwise, a fire mayresult.• When leaving the machine unattended, either the main switch of the machine should be turned to OFF orthe plug must be removed from the electrical outlet.• When servicing the machine or when removing covers, the machine must be unplugged.• (For U.S.A. only)This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electricalshock, this plug is intended to fit in a polarized electrical outlet only one way.If the plug does not fit fully in the electrical outlet, reverse the plug. If it still does not fit, contact aqualified electrician to install the proper electrical outlet. Do not modify the plug in any way.