Appliqué, Patchwork and Quilt StitchingSewing S-35UTILITY STITCHESSFinished projectgAfter sewing is finished, slide the feed dog positionswitch lever to (to the right as seen from the rearof the machine) and turn the handwheel to raise thefeed dogs.Satin stitching using the sewing speedcontrollerA decorative stitch can be sewn by changing the stitch widthof a satin stitch. If the machine is set so that the stitch widthcan be adjusted using the sewing speed controller, the stitchwidth can quickly and easily be adjusted. In this case, thesewing speed is adjusted with the foot controller.aConnect the foot controller.bAttach zigzag foot “J”.cPress to turn on the stitch width control function.→ The machine is now set so that the stitch width canbe controlled with the sewing speed controller.dSelect stitch .eWhile sewing, slide the sewing speed controller toadjust the stitch width.Slide the controller to the left to make the widthnarrower. Slide the controller to the right to make thewidth wider.• Adjust the sewing speed with the foot controller.fWhen you are finished sewing, press to turn offthe stitch width control function.JNarrower WiderMemo• Although the stitching result differs depending onthe type of fabric being sewn and the thickness ofthe thread being used, for best results, adjust thestitch length to between 0.3 and 0.5 mm (1/64 and1/32 inch).
