Features176 Basler sprint Color Cameras6.4.4 Copying the Factory Shading Values into theUser Shading Values FileAs explained in Section 6.4 on page 168, the camera contains a set of factory determined shadingcorrection values in a file in its non-volatile memory. As explained in Section 6.4.2 on page 170, youcan also generate a set of "user" shading values and save them to a separate file in the non-volatilememory.In some situations, it may be advantageous for you to be able to simply copy the contents of thefactory shading values files into the file for user shading valuesYou can copy the values from the factory file into the user file with the Camera Configuration ToolPlus (CCT+) or by using binary read/write commands from within your own application to set thecamera’s bulk data control and status registers (CSRs).With the CCT+With the CCT+ (see Section 7.1 on page 230), you use the File Name Select parameter and theCopy button in the Shading Files parameters group to copy the data in the factory shading valuesfile to the user shading values file.By Setting CSRsYou can copy the data in the factory shading values file to the user shading values file by writingvalues to the shading values bulk data CSR.Section 7.2.3 on page 273 explains bulk data CSRs and using the bulk data copy process.Section 7.3.1 on page 282 explains using read/write commands.
