Features178 Basler sprint Color Cameras6.4.6 Uploading a Shading Values File to Your CameraOnce you have downloaded a user shading values file to your PC as described on the previouspage, you can upload the file from your PC to a camera.Using the download function together with the upload function is useful if you want to transfer a usershading values file from one camera to another camera of the same type.You can upload a user shading values file by using the Camera Configuration Tool Plus (CCT+) orby using binary read/write commands from within your own application to set the camera’s controland status registers (CSRs).Note that when you upload a user shading values file to your camera, you will overwrite any existingvalues in the camera’s user shading values file.With the CCT+With the CCT+ (see Section 7.1 on page 230), you use the Upload button in the Shading Filesparameters group to upload a user shading values file. When you click the button, the CCT+ willopen a window that lets you navigate to your PC and select a file.By Setting CSRsYou can upload a user shading values files by writing values to the shading values bulk data CSR.Section 7.2.3 on page 273 explains the bulk data CSRs and Section 7.2.3.3 on page 276 explainshow to use the CSRs to upload a file. Section 7.3.1 on page 282 explains using read/writecommands.NoteThe factory shading values file can be downloaded from the camera to the PC.The factory shading values file can’t be uploaded from the PC to the camerabecause the factory shading values file in the camera is protected and can’tbe overwritten.
