Cabletron Systems SmartSwitch 9W006 Quick Start Manual

Also see for SmartSwitch 9W006: User guide Release note User guide

Contents

9W006 and 9W007 21M ODULE C ONNECTIVITYConfiguration Using SFVRA-CFGSTARTING SFVRA-CFGTo start SFVRA-CFG:1. Open the SFVRA-CFG application.2. From the menu bar, click on File then click on Connect, or click on the toolbar.3. You will see the Database Login window. Click OK.CONFIGURING A SITE T EMPLATEA site template is a time-saving tool, allowing you to configure a template of basic site informationthat can be used over and over to configure similar sites. The site template we configure will beused for configuring the SmartSwitch Remote Access Module and the CSX1204. To configure thesite template:1. From the menu bar, click on Functions then again on Site Templates, or click on the toolbar.2. Click on Add.3. Enter DEFAULT as the user-defined template name.4. Click on Add.5. All Site Template configuration options will now be available. For our example, the defaultvalue for these configuration options are adequate. For example, the 5ESS default PRI switchtype is what we need for our PRI resources, and mu-law is the correct digital modem encodingstandard for the module’s digital modem resources. Note that you will want to check to makesure the default site template option values are acceptable for your configuration.6. Close out of the site template windows.ADDING THE SITESWe will now add our network’s four sites, one at a time, beginning with the our central site, theSmartSwitch Remote Access Module.A DDING S ITEC ENTRALThe initial steps to configuring a site are as follows:1. From the menu bar, click on Functions then click on Sites, or click on the toolbar.2. Click on Add.