Cabletron Systems SmartSwitch 9W006 Quick Start Manual

Also see for SmartSwitch 9W006: User guide Release note User guide

Contents

9W006 and 9W007 9I NSTALLING THE M ODULEHardware InstallationH ARDWARE I NSTALLATIONThis section provides instructions for:• installing the 9W006/9W007 module in to a SmartSwitch 9000• completing the module’s cablingIn case you need to restart the module during installation, instructions are also included forresetting the module.I NSTALLING THE SMARTS WITCH REMOTE ACCESS M ODULE1. The module fills two SmartSwitch 9000 slots. Remove the SmartSwitch panels that cover thetwo slots into which the module will be installed. For proper airflow and cooling, cover anyempty slots.2. Before installing the module into the chassis, ensure that the bottom and top plastic tabs areunlocked.3. Slide the module into the available slots making sure that the module is between the guides.Take care that the module engages the backplane connectors properly.4. Lock down the top and bottom plastic tabs at the same time, applying even pressure.CONNECTING THE M ODULE’S CABLINGInstalling the module into the SmartSwitch 9000 automatically completes its power supply andSMB connections.What you will need to complete, though, is the Ethernet and PRI cabling. Inaddition, U.S. and European installations need a Mod-Tap adapter for each PRI port.We include an illustration of the 9W006-400. You may find this illustration helpful for locating themodule’s Ethernet and PRI ports. Instructions for each cabling requirement follow the illustration.The SmartSwitch Remote Access Module and the host SmartSwitch 9000 aresensitive to static discharges. Use a grounding strap and observe all staticprecautions during this procedure. Failure to do so could result in damageto the SmartSwitch 9000 or the module.!CAUTION