Cabletron Systems SmartSwitch 9W006 Quick Start Manual

Also see for SmartSwitch 9W006: User guide Release note User guide

Contents

QUICK START24 SmartSwitch Remote Access ModuleA DDING S ITER EM _1204At the initial Site window, click on Add. We can now configure site properties and systems.Configuring SiteRem_1204’s Properties1. Enter Rem_1204 as the Site Name.2. Select Local User Table as the site’s User Database.3. Select DEFAULT for the Site Template.4. Enter Rem_1204 for the Device Authentication Name. This is the name that will be associated withthe site during authentication.5. The CSX1204 will be using CHAP security. Enter 1204 for the CHAP Secret.6. Click on Add. We will next configure the site’s system information.Configuring SiteRem_1204’s System Information1. Click on the Systems tab.2. Click on Add System.3. Select CSX1204 for the system’s Product Code:4. Click on Add.5. To configure the site’s circuit information:a. Double click on the system ID of the system we just configured.b. Click on the Circuits tab.c. Double click on the first BRI resource listed for the module.d. Click on the Data Links tab.e. Enter the following Directory Number for the circuit: 5552222.f. Click on OK.g. Follow steps c through f for the remaining three BRI resources, using the followingdirectory numbers:For the second BRI circuit: 5552223For the third BRI circuit: 5552224For the fourth BRI circuit: 5552225Close all the open windows until you are back at the initial SFVRA-CFG window.CONFIGURING CONNECTION G ROUP INFORMATIONThrough connection groups, you can divide a network into groups of sites that need tointercommunicate. Within each group, you can select a central site for the group, creating a starconfiguration.