Black plate (10,1)Cadillac CTS/CTS-V Owner Manual (Include Mex) - 20121-10 In Briefcolumn position, if the vehicle isequipped with the power tilt andtelescopic steering column.1: Saves and recalls for driver 1.2: Saves and recalls for driver 2.B : Moves the driver seat and/orpower steering column to the exitposition. See “Exit Recall” later inthis section for more information.Storing Memory PositionsTo save into memory:1. Adjust the driver seat, outsidemirrors, and the power steeringcolumn, if equipped, to thedesired driving positions.2. Press and hold “1” until twobeeps sound.3. Repeat for a second driverusing “2.”To recall memory positions, pressand release “1” or “2.” The vehiclemust be in P (Park) for an automatictransmission, or the parking brakemust be applied for a manualtransmission. A single beep willsound when the button is pressed.The seat, outside mirrors, and/orpower steering column will move tothe position previously stored for theidentified driver.If entry/exit recall is programmed onin the vehicle personalization menu,automatic entry recall occurs whenthe ignition is turned on.See Memory Seats on page 3‑8 andVehicle Personalization onpage 5‑46 for more information.Exit RecallB : Press to move the driver seatback a preset distance and/or thepower steering column, if equipped,up and forward. A single beepsounds when the exit featureactivates. The vehicle must bein P (Park) for an automatictransmission, or the parking brakemust be applied for a manualtransmission.If entry/exit recall is programmed onin the vehicle personalization menu,automatic seat and/or steeringcolumn movement occurs undercertain conditions. See MemorySeats on page 3‑8 for moreinformation.Heated and VentilatedSeatsHeated and Ventilated SeatButtons Shown, Heated SeatButtons SimilarIf available, the buttons are on theclimate control panel. To operate,the ignition must be on.M : Press to heat the seat.