Cadillac 2012 CTS Owner's Manual

Also see for 2012 Cadillac CTS: Owner's manual Navigation manual Owner's manual Quick guide

Contents

Black plate (49,1)Cadillac CTS/CTS-V Owner Manual (Include Mex) - 2012Instruments and Controls 5-49To select a setting, press the set/reset button while the desiredsetting is displayed on the DIC.Exit LightingThis feature allows you to select theamount of time you want theexterior lamps to remain on when itis dark enough outside. Thishappens after the key is turned fromON/RUN to LOCK/OFF.Press the customization button untilExit Lighting appears on the DICdisplay. Press the set/reset buttononce to access the settings for thisfeature. Then press the menu up/down button to scroll through thefollowing settings.Off: The exterior lamps will notturn on.10 Seconds (default): The exteriorlamps will stay on for 10 seconds.30 Seconds: The exterior lampswill stay on for 30 seconds.2 Minutes: The exterior lamps willstay on for two minutes.No Change: No change will bemade to this feature. The currentsetting will remain.To select a setting, press the set/reset button while the desiredsetting is displayed on the DIC.Approach LightingThis feature allows you to selectwhether or not to have the exteriorlights turn on briefly during low lightperiods after unlocking the vehicleusing the Remote Keyless Entry(RKE) or keyless access transmitter.Press the customization button untilApproach Lighting appears on theDIC display. Press the set/resetbutton once to access the settingsfor this feature. Then press themenu up/down button to scrollthrough the following settings.Off: The exterior lights will not turnon when you unlock the vehicle withthe transmitter.On (default): If it is dark enoughoutside, the exterior lights will turnon briefly when you unlock thevehicle with the transmitter.The lights will remain on for20 seconds or until the lock buttonon the transmitter is pressed, or thevehicle is no longer off. See RemoteKeyless Entry (RKE) SystemOperation (Key Access) onpage 2‑5 or Remote Keyless Entry(RKE) System Operation (KeylessAccess) on page 2‑6 for moreinformation.No Change: No change will bemade to this feature. The currentsetting will remain.To select a setting, press the set/reset button while the desiredsetting is displayed on the DIC.Factory SettingsThis feature allows you to set all ofthe customization features back totheir factory default settings.