Black plate (37,1)Cadillac SRX Owner Manual (GMNA-Localizing-Europe-8087690) - 2015 -CRC - 7/2/14Driving and Operating 9-37* (Cancel): Press to disengageACC without erasing the set speedfrom memory.[ (Follow Distance Gap): Pressto select a following gap time (ordistance) setting for ACC of Far,Medium, or Near.Setting Adaptive Cruise ControlIf cruise control is on when not inuse, the cruise control on/off controlcould get pressed and cruise controlcould become active when notdesired. Keep the cruise control offwhen cruise is not being used.Select the set speed desired forcruise. This is the vehicle speedwhen no vehicle is detected in itspath slower than the set speed.ACC will not set at a speed lessthan 25 km/h (16 mph), although itcan be resumed when driving atlower speeds.To set ACC:1. Press J.2. Get up to the desired speed.3. Press and release theSET− control on the steeringwheel.4. Remove foot from theaccelerator.After ACC is set, it may immediatelyapply the brakes if a vehicle aheadis detected closer than the selectedfollowing gap.The ACC indicator displays on theinstrument cluster. When the ACC isactive, the indicator turns green.Be mindful of speed limits,surrounding traffic speeds, andweather conditions when selectingthe set speed.Resuming a Set SpeedIf the ACC is set at a desired speedand then the brakes are applied, theACC is disengaged without erasingthe set speed from memory.To begin using ACC again, press+RES up briefly on the steeringwheel. The vehicle returns to theprevious set speed.Increasing Speed While ACC is ata Set SpeedIf ACC is already activated, do oneof the following:. Use the accelerator to get to thehigher speed. Press SET– down.Release the control and theaccelerator pedal. The vehiclewill now cruise at the higherspeed.
