Black plate (7,1)Cadillac SRX Owner Manual (GMNA-Localizing-Europe-8087690) - 2015 -CRC - 7/2/14Seats and Restraints 3-7handle and open the driver door.The RKE transmitter must bepresent for the recall to activate.. If the driver door is alreadyopen, press K on the RKEtransmitter to activate the recall.To activate the recall when On - AtIgnition On is selected in the vehiclepersonalisation menu:. Place the ignition in ON/RUN/START.See Vehicle Personalisation onpage 5-39.To stop recall movement, press oneof the memory, power mirror orpower seat controls; or press theadjustable pedal switch (ifequipped). If On - At Ignition On isselected in the vehiclepersonalisation menu, placing theignition in OFF also stops the recall.Easy Exit RecallIf programmed on in the vehiclepersonalisation menu, this featuremoves the seat approximately 7 cm(3 in) rearward automaticallyallowing the driver more room to exitthe vehicle.Easy Exit recall activates when oneof the following occurs:. The vehicle is turned off and thedriver door is opened within ashort time.. The vehicle is turned off with thedriver door open.See Vehicle Personalisation onpage 5-39.To stop recall movement, press oneof the memory, power mirror, powerseat controls or the adjustable pedalswitch (if equipped).ObstructionsIf something has blocked the driverseat and adjustable pedals (ifequipped) while recalling a memoryposition, the recall may stop.Remove the obstruction. Then doone of the following:. If manually recalling the position,press and hold the appropriatemanual control for the memoryitem that is not recalling fortwo seconds. Try recalling againby pressing the appropriatememory button.. If automatically recalling theposition, press and hold theappropriate manual control forthe memory item that is notrecalling for two seconds. Tryrecalling again by opening thedriver door and pressing K onthe RKE transmitter.. If recalling the exit position,press and hold the power seatcontrol rearward fortwo seconds. Then try recallingthe exit position again.
