Black plate (60,1)Cadillac SRX Owner Manual (GMNA-Localizing-Europe-8087690) - 2015 -CRC - 7/2/1410-60 Vehicle Care4. Remove the valve stem cap fromthe flat tyre by turning itanticlockwise.5. Attach the sealant/air hose (6)onto the tyre valve stem. Turn itclockwise until it is tight.6. Plug the power plug (8) into theaccessory power outlet in thevehicle. Unplug all items fromother accessory power outlets.See Power Outlets on page 5-6.If the vehicle has an accessorypower outlet, do not use thecigarette lighter.If the vehicle only has a cigarettelighter, use the cigarette lighter.Do not pinch the power plugcord in the door or window.7. Start the vehicle. The vehiclemust be running while using theair compressor.8. Press and turn the selectorswitch (1) anticlockwise to theSealant + Air position.9. Press the on/off (2) button toturn the tyre sealant andcompressor kit on.The compressor will injectsealant and air into the tyre.The pressure gauge (3) willinitially show a high pressurewhile the compressor pushes thesealant into the tyre. Once thesealant is completely dispersedinto the tyre, the pressure willquickly drop and start to riseagain as the tyre inflates withair only.10. Inflate the tyre to therecommended inflationpressure using the pressuregauge (3). The recommendedinflation pressure can be foundon the Tyre and LoadingInformation label. See TyrePressure on page 10-43.The pressure gauge (3) mayread higher than the actual tyrepressure while the compressoris on. Turn the compressor offto get an accurate pressurereading. The compressor maybe turned on/off until thecorrect pressure is reached.{ CautionIf the recommended pressurecannot be reached afterapproximately 25 minutes, thevehicle should not be drivenfarther. The tyre is too severelydamaged and the tyre sealantand compressor kit cannot inflatethe tyre. Remove the power plugfrom the accessory power outletand unscrew the inflating hosefrom the tyre valve.
