Black plate (8,1)Cadillac STS Owner Manual - 20117. A beep sounds once programming in complete.The DIC displays READY FOR 3 or 4, or MAX #FOBS LEARNED.8. Remove the transmitter from the transmitter pocketand press K twice on each newly programmedtransmitter to complete the process.9. To program additional transmitters, repeat Step 6.Press Acc. on the ignition switch if programming iscomplete.Programming without a RecognizedTransmitterThis procedure requires three ten minutes cycles tocomplete the programming process. United Statesowners are permitted to program a new transmitter totheir vehicle when a recognized transmitter is notavailable. The Canadian immobilizer standard requiresthat Canadian owners see their dealer for programmingnew transmitters when two recognized transmitters arenot available.1. The vehicle must be off.2. Place the new transmitter into the transmitterpocket, located inside the center console storagearea located between the driver and frontpassenger seats, with the transmitter buttonsfacing the front of the vehicle.3. Insert the vehicle key into the key lock cylinderlocated on the driver door.4. Turn the key to the unlock position five times withinfive seconds.5. The DIC message displays OFF/ACC TO LEARN.6. Press Acc. on the ignition switch.3-8
