Black plate (82,1)Cadillac STS Owner Manual - 2011Using the Tire Sealant and CompressorKit without Sealant to Inflate a Tire(Not Punctured)To use the air compressor to inflate a tire with air onlyand not sealant:If a tire goes flat, avoid further tire and wheel damageby driving slowly to a level place. Turn on the hazardwarning flashers. See Hazard Warning Flashers onpage 4‑3.See If a Tire Goes Flat on page 6‑74 for otherimportant safety warnings.1. Remove the tire sealant and compressor kit fromits storage location. See Tire Sealant andCompressor Kit Storage on page 6‑94.2. Unlock the air only hose (F) from the sealantcanister (B) by pulling up on the lever.3. Pull the air only hose (F) from the sealantcanister (B).4. Remove the power plug (C) from the aircompressor (A).5. Place the kit on the ground.Make sure the tire valve stem is positioned close tothe ground so the hose will reach it.6. Remove the tire valve stem cap by turning itcounterclockwise.7. Attach the air only hose (F) onto the tire valve stemand push the lever down to secure it.6-82
