Printing procedureBasic Printing WorkowPrinting procedureLoading and Printing on RollsThese are the basic steps for loading and printing on rolls.Follow the steps below to switch to a new roll or a roll of a different type or width before printing.Note• If you are not using the Media Take-up Unit, spread a clean cloth or paper on the oor before printinglong documents such as banners. Otherwise, use the optional Output Stacker. (→P.220)The printing may become dirty by touching the oor, when the long sheet is printed.• If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivateautomatic cutting and cut the paper manually. (→P.191)1. Turn the printer on. (→P.18)2. Select a roll as the paper source. (→P.176)140 Basic Printing Workow
