Printing procedure8. Start printing.• Printing from Windows (→P.153)• Printing from Mac OS X (→P.151)• Printing from Mac OS 9 (→P.149)Note• You can skip steps 5 and 6 if a barcode has been printed on the roll paper and you have activatedautomatic detection of the remaining roll. The paper type and amount of paper left are automaticallydetected. The barcode will automatically be cut off after it has been read.• You can skip step 6 if you have deactivated automatic detection of the remaining roll paper.• If you have deactivated width detection, you will need to enter the roll width after choosing the papertype in step 5. (→P.48)• For details on supported sizes and types of rolls, see Paper Sizes (→P.173) or the Paper ReferenceGuide. (→P.167)• When printing on rolls after printing on sheets, if the lit paper selection lamp does not switch from theCut Sheet lamp to the Roll Media lamp, press the Feeder Selection button.Important• After changing rolls, clean the Platen. (→P.714)Basic Printing Workow 143
