Borderless PrintingBorderless Printing at Actual Size (Windows)This topic describes how to print borderlessly at actual size based on the following example.• Document: Any type• Page size: 10×12 inches (254.0×304.8 mm)• Paper: Roll• Paper type: Heavyweight Coated Paper• Roll paper width: 10 inches (254.0 mm)1. Create the original in the source application 3 mm (0.12 in) larger on each side than 254.0×304.8mm (10 × 12 in) —that is, 260.0×310.8 mm (10.2 × 12.2 in)Note• If you can specify the margin, as in Microsoft Word, set the margin at 0 mm. For instructions onspecifying the margin, refer to the software documentation.• The extra 3 mm (0.12 in) on each side will not be printed. Create the original so that it ts inside thepaper area to be printed on.2. Choose Print in the application menu.3. Select the printer in the dialog box, and then display the printer driver dialog box. (→P.535)4. Make sure the Main sheet is displayed.5. In the A Media Type list, select the type of paper that is loaded. In this case, click HeavyweightCoated Paper.6. Select the print target in the E Print Target list.Enhanced Printing Options 375
