Handling rollsRemoving the Roll from the PrinterCaution• If you have activated automatic detection of the remaining roll paper, always follow the steps below toremove rolls. You will be unable to manage the amount of roll paper left if you move the Release Leverand remove the roll before the barcode is printed.1. Press the Load/Eject button.A conrmation message is displayed regarding removal of the roll.2. Press the OK button.The roll can now be removed.Note• If you need to cut the roll, execute Paper Cutting on the Control Panel. (→P.191)• To have a barcode indicating the remaining roll paper printed on the edge of the roll paper, specifyOn in Chk Remain.Roll in the Media Menu and Automatic in the Cutting Mode setting in PaperDetails.If the document is not cut but kept in the printer, only the text message is printed. In this case,cut the roll with scissors and remove the sheet.3. Open the Top Cover and lift the Ejection Guide.184 Handling Paper
