Control PanelInterface SetupSetting Item Description, InstructionsEOP Timer Specify the timeout period before cancellation ofprint jobs that cannot be received by the printer.IP Mode Choose whether the printer IP address iscongured automatically or a static IP addressis entered manually.DHCPBOOTPProtocolRARPSpecify the protocol used to congure the IPaddress automatically.IP AddressSubnet MaskTCP/IPIP SettingDefault G/WSpecify the printer network information whenusing a static IP address.Enter the IP address assigned to the printer, aswell as the network subnet mask and defaultgateway.NetWare Specify the NetWare protocol. To apply yourchanges, choose Register Setting.Frame Type Specify the frame type to use.NetWarePrint Service Choose the print service.AppleTalk Specify whether to use the AppleTalk protocol.To apply your changes, choose RegisterSetting.Auto Detect Specify the communication method. To applyyour changes, choose Register Setting.Choose On for automatic conguration of theLAN communication protocol. Choose Offto use settings values of Comm.Mode andEthernet Type.Comm.Mode Choose the LAN communication method.Ethernet Type Choose the LAN transfer rate.Spanning Tree Choose whether spanning-tree packets aresupported over the LAN.Ethernet DriverMAC Address Displays the MAC address.Ext. Interface Choose the expansion interface.Return Defaults Execute? is displayed if you press the ▼button. Choose OK to restore the networksettings to the default values.54 Printer parts
