Handling rollsDetection of the Remaining Roll PaperIf you have activated automatic detection of the remaining roll paper, when the roll is ejected, a barcode with text isprinted on the roll paper that identies the type of paper and amount left. If this function is activated and barcodesare printed on the roll paper, the type of paper and amount left are automatically detected when you load aroll. The barcode will be cut off after it has been read.Note• Only the text message is printed if the document is not cut but kept in the printer, or if you are printing onclear lm.Important• If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel.Follow these steps to activate detection of the remaining roll paper.1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Media Menu, and then press the ► button.3. Press ▲ or ▼ to select Chk Remain.Roll, and then press the ► button.4. Press ▲ or ▼ to select the desired setting option, and then press the OK button.Handling Paper 189
