Handling rollsHandling rollsSelecting the Roll as the Paper SourceYou can switch the paper source between the roll and the sheet by pressing the Feeder Selection button.Each time you press this button, the paper source switches between the roll (indicated by the Roll Medialamp ) and the sheet (indicated by the Cut Sheet lamp ).Press the Feeder Selection button to activate the Roll Media lamp (a).Note• You cannot switch the paper source in the following situations:• If the Message lamp is ashingCheck the message on the Display Screen and take action as necessary. (→P.758)• If the Data lamp is ashingSelect the paper source after printing.• If a printer menu operation is in progressSelect the paper source after the menu operation.• When in the process of loading paperFinish loading the paper before selecting the paper source.• When in the process of replacing Ink TanksFinish replacing the Ink Tanks before selecting the paper source.• If the Top Cover is openClose the Top Cover before selecting the paper source.After you select the roll as the paper source, a message is displayed instructing you to load the roll. At thispoint, load the roll. (→P.180)Note• If any paper is loaded that will not be used, remove it before loading the roll.(→P.184)(→P.214)176 Handling Paper
