Handling rolls2. With the edge of the roll paper facing forward as shown, insert the roll in the Roll Holder from theleft. Insert the roll rmly until it touches the ange (a) of the Roll Holder.Important• Insert the roll rmly so that there is no gap between the roll and the ange of the Roll Holder. Ifthere is a gap, it may cause feeding problems.• Set the roll on a table or other at surface so that it does not roll or fall. Rolls are heavy, and droppinga roll may cause injury.• When setting a roll, be careful to avoid hitting the roll holder ange hard with the roll. This maydamage the Roll Holder.3. Insert the Holder Stopper from the left in the Roll Holder as shown. Holding it at the positionshown (b), push it rmly in until the ange (a) of the Holder Stopper touches the roll. Lock theHolder Stopper lever (c) by pushing it down toward the shaft side.178 Handling Paper
