2-14Registering coded speed diallingnumbers and namesUse coded speed dialling to dial a fax number at the press of three buttons. A fax/telephone number can beregistered under each two-digit speed dialling code (00-99) and you can register up to 100 locations, witheach number containing up to 120 digits. You can also register the name of the party (up to 16 characters);the name appears on the printout of the coded speed dialling list. See Coded speed dialling list, p. 8-9.Follow the procedure below to register numbers and names for coded speed dialling.1 Press [Function].Press [Data Registration].2 Use [u] or [d] to select TEL REGISTRATION.Press [Set].3 Use [u] or [d] to select CODED SPEED DIAL.Press [Set].4 Use [u] or [d] to select the two-digit code underwhich you want to register the number.• If a number is already registered under this coded speeddialling code, the number or GROUP DIAL is displayed onthe LCD.*• It is also possible to select a two-digit code directly bypressing [Coded Dial] followed by the two-digit code.Press [Set] twice.5 Enter the party’s number and name the same wayyou registered them for one-touch speed dialling.(See steps 5 to 8, Registering one-touch speed diallingnumbers and names, p. 2-12.)6 To assign additional coded speed dialling numbers,start from step 4.To finish, press [Stop].FunctionData registration DATA REGSTRATIONTEL REGISTRATIONSet1-TOUCH SPD DIALCODED SPEED DIALSet A00=A32=TELEPHONE NUMBERTEL=_SetTEL=81 773 3173_0 9Stop* To delete the name and number registered under the coded speed dialling code, press [Clear] after you perform steps 1 to4 above.
