6-12Sequential broadcastingSending a document to more than one locationSequential broadcasting sends one document to more than one location.You can send to a total of 113 locations as follows:One-touch speed dialling = 12 locationsCoded speed dialling = 100 locationsRegular dialling (Numeric buttons dialling) = 1 locationYou can enter the one-touch speed dialling, coded speed dialling and regular dialling locations in any order.Remember that when using regular dialling, you must press [Set] after entering the number.You can send up to 20*A4-size pages.1 Load the document face down into the AutomaticDocument Feeder (ADF).See Loading documents, p. 3-3.You can set the scanning resolution and contrast. (see p. 6-2)2 Dial the receiving party’s fax number.• You can also press [Redial/Pause] to redial the last numberdialled with the numeric buttons.• You must press the second button within 5 seconds of thefirst one, and each subsequent button within 10 seconds ofthe preceding one. The fax begins the operationapproximately 10 seconds after you press the last button.3 Press [Start].• The fax reads the document into memory and beginssending.• To cancel a transmission, press [Stop] during dialling ortransmission. All transmissions in the sequence arecancelled.DOCUMENT READYTEL= 34567890Start / Resume TX/RX NO. 00071 sec.SCANNING P.001* A maximum of 42 pages (Canon FAX Standard Chart No.1, standard resolution) can be scanned into fax memory. Amaximum of 20 pages can be loaded into the ADF.
