8-4REPORT SETTINGSFor details on accessing the settings below, see p. 8-2.TX SETTINGSFor details on accessing the settings below, see p. 8-2.NameDescriptionSettingsTX REPORT Enable/disable automatic printing of the transmission report.OUTPUT YES: Set the fax to print an activity report every time yousend a document.PRINT ERROR ONLY: Print only when an error occurs during sending.OUTPUT NO: Turn off the activity report feature.OUTPUT NO/PRINT ERROR ONLY/OUTPUT YESPRINT WITH IMAGE When you set TX REPORT to OUTPUT YES or PRINT ERROR ONLY,you can add to the TX report half of the first page of the document thatwas being sent. This can help remind you which document was beingsent. Valid only for memory sending.ON/OFFRX REPORT Enable/disable automatic printing of the reception report.OUTPUT YES: Set the fax to print an activity report every time youreceive a document.PRINT ERROR ONLY: Print only when an error occurs duringreceiving.OUTPUT NO: Turn off the activity report feature.OUTPUT NO/PRINT ERROR ONLY/OUTPUT YESACTIVITY REPORT Enable/disable automatic printing of the activity report. -AUTO PRINT When you set ON, your fax is set to print an activity report for every 20transactions (sending and receiving).ON/OFFNameDescriptionSettingsECM TX Enable/disable error correction during transmission. ON/OFFMID PAUSE SET Set the length of the pause you insert into a dialling sequence. 4 seconds (1 to 15)AUTO REDIAL Determine whether the fax will redial a number if it fails to get aresponse on the first attempt.ON/OFFREDIAL TIMES Set the number of retries. 2 times (1 to 10)REDIAL INTERVAL Set the period of time between redialling attempts. 2 minutes (1 to 99)TIME OUT Enable/disable automatic scanning of documents after the fax numberis entered.When you set ON, scanning begins automatically 5 seconds after youenter the fax number.ON/OFF
