6-156SENDING DOCUMENTSDelayed sendingYour fax can send documents automatically at a preset time. This allows you to take advantage of lower latenight long-distance rates offered by some telephone companies.It is possible to set the fax to send transmissions at 30 different preset times. See Sending a document tomore than one location for details, p. 6-12.Follow the procedure below to send a document using delayed sending.1 Load the document face down into the AutomaticDocument Feeder (ADF).See Loading documents, p. 3-3.You can set the scanning resolution and contrast.(see p. 6-2)2 Press [Function].Press [Timer].3 Press [Set].4 Enter the desired sending time (24-hour clock)using the numeric buttons.• Set the time using the 24-hour clock system.Precede single digits with a zero.Example: 7:30 a.m. = 07:30• Press [Clear] if you need to re-enter the time.• You can also use [l] or [r] to move the cursor.5 Press [Set].6 Enter the receiving party’s fax number.• You can enter the receiving party’s fax number using thenumeric buttons, one-touch speed dialling, coded speeddialling, or group dialling (see p. 2-18). If necessary, press[Function] to turn its light off.• If you use the numeric buttons, press [Set] after entering thenumber to register it before going on to the next number.DOCUMENT READYFunctionTimer REGISTERSet SET TIME 15:00SET TIME 23:000 9Set SELECT LOCATIONS1 sec.TEL=TEL= 34567890
