145E AdditionalInformationMemory Card OperationsCause and/or what to do about it• It is not turned the right way ( 115).Turn it the right way and try inserting again.• Turn the camcorder’s power off and back onagain and remove and reinsert the card. If themark continues to flash, format the memorycard.• The camcorder is not set to CARD CAMERA orCARD PLAY (VCR) mode ( 118, 120).• The memory card is not inserted ( 115).• You are using an SD Memory Card and it is setfor erasure prevention. Change the position ofthe protect switch.• The memory card is full. Erase images ( 122)or insert a new memory card.• The power source is not properly connected, orthe battery pack is exhausted or not properlyattached ( 16-17, 137).• The function cannot be used in that recordingprogram ( 52).• The memory card is not loaded ( 115).• You are using an SD Memory Card and it is set forerasure prevention. Change the position of theprotect switch.• The memory card is full. Erase images ( 122)or insert a new memory card.• You have reached the maximum file number. Setthe file numbering to RESET through the menu( 117) and insert a new memory card.• You are using an unformatted memory card.Format the card ( 133).• The image is protected ( 122).• You are using an SD Memory Card and it is setfor erasure prevention. Change the position ofthe protect switch.Problem? The memory card will not insert.? The mark flashes red in the displayeven though a memory card has beeninserted.? Nothing happens when I press thebuttons.? The PHOTO button does not work.? The image cannot be erased.
