146EAdditionalInformationMiscellaneousCause and/or what to do about it• The remote sensor mode is set to OFFB inthe menu ( 30).• The remote sensor modes of the wirelesscontroller and the camcorder itself are different( 30).• The batteries are dead or not inserted.• Check the screen displays ( 137).• This is unlikely, but may happen if you use thecamcorder in places where the air pressure islow, in an airplane for example. The bubbles willdisappear a week or so after you return thecamcorder to normal atmospheric pressure.• External interference may cause the camcorder’smicroprocessor to malfunction temporarily. Ifrandom letters appear in the display or if normaloperation is interrupted, remove and thenreplace the power source.• Remove the cable and then reconnect it or turnthe power off and back on again.• This is not a malfunction.Problem? The wireless controller does not work.? The power indicator is flashing.? There are air bubbles inside the lens.? The camcorder malfunctions.? The DV cable is connected correctly, butthere’s nothing in the display.? The camcorder becomes warm duringuse.
