96EPlaybackIf Your TV (or VCR) Has Audio/Video Input TerminalsRLAUDIOVIDEO• Connect the camcorder using the STV-250N Stereo Video Cable. Connect the white plug to thewhite audio terminal L (left). Connect the red plug to the red audio terminal R (right). Connectthe yellow plug to the yellow video terminal VIDEO.• Set the TV/VIDEO selector on the television to VIDEO.• If you are connecting the camcorder to a VCR, set the input selector on the VCR to LINE.Note:• If you are going to use the TV as a monitor while you are shooting, remember to keep the TVvolume turned down as long as the camcorder’s audio terminals are connected to preventfeedback.• If your TV is already connected to a VCR, you can connect the camcorder to the VCR instead ofthe TV. Follow the instructions above.STV-250N Stereo Video Cable
