79ERecordingThe camcorder focuses automatically. All you have to do is point, and whatever is in the center ofthe display will usually be in sharp focus. If it does not seem to be focusing well, it may be becausethe subject is not suitable for autofocus ( 144). Also, if you attach a filter other than UV or ND,the autofocus may not work effectively.1. Slide the program selector to Q.2. Push the FOCUS A/M button so thatMF appears in the display.3. Using the zoom lever, zoom all theway in to the telephoto end.4. Rotate the focusing ring to adjustthe focus.5. Use the zoom lever to reframe thesubject.• To resume autofocus, press the FOCUSA/M button again.Notes:• The picture in the LCD screen may appear out of focus when shooting in dark conditions.• When zooming during manual focus, zoom out wide after setting the focus at the telephoto end.• The focus may be thrown off if you zoom into telephoto after setting the focus at the wide angleend.• Autofocus is recommended for zooming in to telephoto from the wide end.• If you slide the POWER switch to OFF or the standby lever to LOCK, the camcorder resets to autofocus.FOCUSA/MAdjusting the Focus Manually
