51ERecordingSearching and Reviewing While RecordingWhen the camcorder is in record pause mode,you can use record search to play the tapeforwards or backwards to find the point whereyou wish to start or restart recording. This isuseful when you wish to add a new scene to apreviously used cassette. By using record search,you can ensure a smooth, noise-free join betweenthe new scene and the old one.1. Press and hold the REC SEARCH + or – button while you check the picture inthe display.• The + button plays the recording forwards and the – button plays it backwards.2. Release the button when you find the point where you want to startrecording.• The camcorder returns to record pause mode.When the camcorder is in record pause mode, you can use record review to play back the last fewseconds of your recording and then return automatically to record pause mode. You can quicklymake sure that a scene has recorded properly and then go on to shoot the next scene, withoutproducing any noise in the picture.1. Press and release the c (record review) button while you check the picture inthe display.• The camcorder rewinds the tape, plays back the last few seconds, and returns to record pausemode.Note:• Noise may appear on the screen during record search and record review.REC SEARCH+ CAMERATAPE+ CAMERATAPERecord SearchRecord Review
