18EPreparations1. Attach a power source.2. Slide the OPEN/EJECT button and release the cassette compartment cover.• Wait for the cassette compartment to open automatically.• The confirmation beep sounds when it is fully opened.3. Load or unload the cassette.• Insert the cassette gently with the window facing outward.• Remove the cassette by pulling it straight out.4. Press the P mark on the compartment until it clicks.5. Click the cover back into place.Notes:• Do not interfere with the cassette compartment while it is opening or closing, or attempt to closethe cover.• Be careful not to get your fingers caught in the cassette compartment cover.• Do not leave the cassette in the camcorder after use — return it to its case and store it in a cool,clean, dry place.• When no cassette is loaded, v flashes in the display.• With some types of tapes, the remaining tape display may not give an accurate reading.Use only videocassettes marked with the DV logo.*CLOSE THIS FIRST.* D logo is a trademark.Loading and UnloadingLoading a Cassette
