93EPlaybackThis allows you to move quickly through still images (photo search), between different days or areasof recording (date search), or index signals ( 59) recorded anywhere on a tape (index search).1. Press the SEARCH SELECT button to select between photo/date/index search.• PHOTO SEARCH, DATE SEARCH or INDEX SEARCH appears for 4 seconds.2. Press the - and + buttons to move backwards or forwards through the stillimages, between different days of recording or recorded index signals.• Press once to move to the start of the previous/next still image, day or index on the tape.• You can press more than once to move to the corresponding still image, day or index (up to amaximum of 10 times), e.g. press the + button 5 times to move forward 5 still images, daysor index signals.• PHOTO SEARCH/DATE SEARCH/INDEX SEARCH appears in the middle of the display alongsidethe - or + mark and number to search through. You can change the direction easily bypressing the button for the opposite direction.Notes:• Press 3 (stop) to stop searching.• If you begin a search very close to the start of a recorded still image during photo search, thecamcorder may skip straight past it.• When you have set the time zone, date search also looks for the change in date based on theadjusted time.• A date/time zone cannot be identified if the total recording time on that day/time zone was lessthan 1 minute.• Date/index search playback may start slightly before or after the beginning of the located section.• If the data code is not displayed correctly you will not be able to operate the date search correctly.REW PLAY FFREMOTE SETSEARCHSELECTZERO SETMEMORYAUDIODUB.STOPAVINSERTPAUSE SLOW ×2+ /– /+ PLAY(VCR)TAPESearching the Tape (Photo Search/Date Search/Index Search)
