44ERecordingWhen you turn the LCD panel so that it faces into theopposite direction, you can allow your subject to monitorthe screen, or you can monitor yourself while recording.• You can choose the display style between reversed (LCDMIRROR ON) or not (LCD MIRROR OFF) in the menu.You can adjust the brightness of the LCD screen and the viewfinder independently.1. Open the menu and select DISP. SET UP.2. Select LCD BRIGHT or EVF BRIGHT and adjust the brightness.• Pull the SELECT dial up to make the display brighter, and down to make it darker.3. Close the menu.Notes:• The camcorder retains your brightness setting even if you slide the POWER switch to OFF.• The brightness of the LCD screen/viewfinder does not effect that of the recorded images.About the LCD ScreenThe LCD screen built into this camcorder is a high precision product.However, small black dots or bright points of light (red, blue or green) may appear constantly onthe LCD screen. This is not a malfunction of the LCD screen and they are not recorded on the tape.(Effective dots: more than 99.99%)Adjusting the Brightness of the DisplayAllowing the Subject to Monitor RecordingLCD BRIGHT••DISP. SET UP – +EVF BRIGHT•• – +( 20)LCD MIRROR••• ONDISP. SET UP( 20)+ , + , + , + PLAY(VCR)CARDCAMERACARDPLAY(VCR)TAPECAMERATAPE+ , + CAMERACARDCAMERATAPE
