6-4 Scanning With the MultiPASS C3500 Chapter 63. In the ScanGear window, specify the scan preview options for yourdocument as necessary.4. Click Preview.5. Review the display of the scanned preview image in the scanwindow. Adjust the properties of your image as necessary.6. Replace your document in the document feeder of the MultiPASS.7. Click Scan.An indicator displays showing you the progress of the scan. Oncecomplete, the image is stored in the Scan folder, where it remainsuntil you move or delete it.Scanning From a Windows ApplicationYou can use the MultiPASS to scan documents directly into a Windowsapplication that supports a TWAIN interface (such as Photoshop). Someapplications allow multiple page scans, while others do not. If you areunsure whether your Windows aplication supports this feature, refer tothe user documentation for the application you are using.The following instructions summarize the general procedures forscanning an image. For specific information on scanning with yourWindows application and specifying MultiPASS as the scan device, referto the user documentation for the application you are using.1. Place the image you want to scan face down in the ADF (automaticdocument feeder) of the MultiPASS.2. In your Windows application, choose the command to scan adocument.In some applications, the appropriate command may be listed asAcquire or Acquire Image.3. In the ScanGear window, specify the preview scan options for yourdocument as necessary.4. Click Preview.5. Review the display of your scanned preview image. Adjust theproperties of the image as necessary.
