8-8 Setup and Other Utilities in the Desktop Manager Chapter 8m Dedcated Fax Receive (FaxOnly)—Automatically receive only faxcallsm Manual Receive (Manual)—Require you to manually answer theincoming call and then set the MultiPASS for an incoming faxm Answering Machine Mode (AnsMode)—Automatically receive a callwith your answering machinem Distinct Ring Pattern Detect (DRPD)—Automatically switchbetween receiving a call either as a fax or telephone call based on thering tone for each type of call (This setting is applicable only if yousubscribe to a special network service with your phone companythat defines multiple ring tones for your phone line.)Answer Silent ReceiveYou select this option to set the MultiPASS not to ring for an incomingfax. (This is applicable only in FaxTel Mode and Fax Only Mode.)Answer Number of RingsIf you cleared the Silent Receive option, indicating you want theMultiPASS to ring for incoming fax calls, you specify the number oftimes the MultiPASS should ring for the fax call. The MultiPASS willonly ring if you have connected a telephone.Receive ConditionsYou can specify how the system should handle an incoming fax underthe following conditions.m If your computer is turned off:You set the MultiPASS to print the fax (Print Fax) or save the fax inits memory (Save in Memory).m If your computer is turned on:You set the MultiPASS to move the fax to the Desktop Manager onyour computer (Upload Fax), or to print the fax (Print Fax).Report PrintYou can specify whether or not you want a report to print with each faxreception, or only when there is an error.Restoring the Default SettingsIf you want to restore the option default settings after making changes,click Use Defaults.
