10-18 Troubleshooting Chapter 10Problem Cause SolutionPaper is loaded skewed Paper may not be stacked Make sure the stack of paper(printing is skewed) correctly in the sheet feeder. is straight in the sheet feeder.Make sure the right side of thestack of paper is aligned againstthe right side of the sheetfeeder and the paper guide isaligned against the left side.Make sure the paper exit pathis clear.Multiple sheets load Paper may not be stacked Make sure paper is installedinto unit at the same correctly. correctly in the sheet feeder.time Sheets of paper may be Be sure to fan the stack ofsticking together. paper before placing it in thesheet feeder.Too much paper may be Make sure the paper rest isstacked in the sheet feeder. extended and the paper isstacked correctly in the sheetfeeder.Make sure the stack of paperdoes not exceed the limit mark.If necessary, remove a fewsheets from the sheet feeder.Do not stack more thanapproximately 100 sheets ofplain paper in the sheet feeder.Do not force the stack into thesheet feeder.Different types of paper may Load just one type of paper.be stacked in the sheet feeder. Make sure you are loadingpaper that matches thespecifications of this unit.See Appendix A, Specifications,for details.Transparencies or back The film may not be loaded Make sure you load no moreprint film do not feed correctly. than 50 sheets of transparenciescorrectly or 10 sheets of back print filmin the sheet feeder.
