2-2 Installing the Desktop Manager Software Chapter 2Installing the SoftwareWhen you install the printer driver and Desktop Manager, you are alsoinstalling the fax and scan drivers, the Desktop Manager Background,and the Desktop Manager utility programs.The Desktop Manager software is installed in the C:\MPASS drive anddirectory on your local hard disk, unless you specify another drive and/or directory during the installation process. The installation processchanges some of your system files.During the installation, you are prompted to enter certain fax setupinformation. This information can later be changed in the DesktopManager, as described in a later chapter.n The fax setup information you enter during the installation adjustscorresponding settings in your L60. Therefore, any fax information youmay have set manually in the L60 is replaced by the information youenter when installing the Desktop Manager.During installation, the MultiPASS Background is automatically added toyour Windows StartUp group. This setup enables your system toautomatically start the MultiPASS Background each time you startWindows.Preparing for the InstallationBefore you actually begin the installation, take some time to prepare thesystem and fax setup information for the process.❏ Connect the L60 to the parallel port on your computer.The selected parallel port must be a dedicated port. The L60 does notoperate with a redirected or virtual parallel port.❏ Prepare the following fax setup information, entered duringinstallation: