Chapter 9 Frequently Asked Questions 9-5Frequently AskedQuestions❏ Is the L60 warm to the touch?The unit might have overheated and shut down. Turn the unit off and letit cool down for several minutes but less than one hour, or you might loseinformation registered in memory. Try using it again.❏ Are you not able to make copies?The handset might be out of the cradle. Make sure the handset is in itscradle.Documents Are Not Printing Correctly.❏ Is the operation panel blank?You might have a power problem. Check that the power cord is pluggedsecurely into the unit, and that your electrical source is OK.❏ Is the L60 warm to the touch?The unit might have overheated and shut down. Turn the unit off and letit cool down for several minutes but less than one hour, or you might loseinformation registered in memory. Try using it again.❏ Is the ALARM light on?Turn off the L60 unit. Wait 15 seconds and plug it in again to turn onpower. The ALARM light should go out. Also check to see if paper isjammed.❏ Does the L60 LCD display read “Check Paper Size”?If you are printing from a Windows application, the print setup optionsmay be conflicting. Make sure that the selected paper sizes correspond inthe following:❏ L60 paper feederThe paper in the L60 feeder must be the same size as the settings youhave selected, whether it feeds manually or automatically.
