3-6 Printing with the L60 Chapter 3Changing the Printer SettingsPrint options consist of settings that determine the type of output foryour document. As mentioned earlier, print options are initially installedwith default settings, enabling you to print a document immediately.However, you may want to change the settings.Typically, you would change the printer settings when you print adocument. The following instructions summarise the procedures forchanging the printer settings. For detailed information on the specificprinter options, refer to later sections in this chapter.To change the print options:1. Within your Windows application, with your document open, clickthe print command.2. In the print dialog box, click Properties.3. On the Paper, Graphics, and Setting tabs, specify the printer optionsyou prefer.4. To save your changes and close the dialog box, click OK.To save your changes and leave the dialog box open, click Apply.To close the dialog box without saving your changes, click Cancel.An Alternative Method for Changing Printer SettingsYou can access the printer driver options from the Windows desktop,before actually printing the document. The following informationsummarises this method of accessing printer options. For details, refer toyour Windows user documentation.From the Windows desktop, click Start, and then point to Settings. On theSettings menu, click Printers. In the Printers dialog box, click the CanonMultiPASS L60 printer. On the File menu, click Properties. Specify theappropriate changes.