Chapter 6 Sending Faxes 6-13Sending FaxesSetting the Resolution and ContrastSetting the Scanning ResolutionCanon’s Ultra High Quality (UHQ™ ) imaging technology enables you tosend faxes with a print quality that is very close to that of the originaldocument. The MultiPASS L60 also lets you adjust the resolution it usesin sending faxes to best suit your particular document.The MultiPASS L60 has three resolution settings:❏ STANDARD resolution (203 × 98 dpi) is adequate for most textdocuments.❏ FINE resolution (203 × 196 dpi) is suitable for documents with fineprint (smaller than the print in this sentence).❏ PHOTO resolution (203 × 196 dpi, with halftones) is for documentsthat contain photographs. With this setting, areas of the documentthat contain photos are automatically scanned with 64 levels of grey,rather than just two (black and white). This gives a much betterreproduction of the photos, though transmission time is longer.Set the resolution as follows:1. Press RESOLUTION.❑ The LCD display shows the current resolution setting.2. Press RESOLUTION until the resolution you want is displayed.(FINE resolution with halftone)3. Continue with the operation you wish to complete.❑ If you do not proceed with any other operation, the LCDdisplay returns to standby mode after about 5 seconds.14:30 FaxOnlySTANDARDPHOTOFINESTANDARD
